|
|
Today's industrial users face ever-increasing
pressure to operate efficient and profitable processes, and place the same
demands on the equipment they buy to support those processes.
Many companies realize that total cost of ownership is the only criteria by
which to properly evaluate their equipment needs. Pumps, compressors and
blowers that need service frequently, or cost more in power to operate are
often the most costly choice. Listed below is a summary of the products we
offer to meet your demanding criteria.
We believe that National Process Equipment
provides one of the most complete and comprehensive ranges of pump, compressor and blower products. Many of
these products utilize innovative technology and all are produced by
world-class manufacturers and backed up by our engineering, parts and
service personnel operating from eight facilities across Canada.
For over 40 years, we've been selected to supply
equipment for a wide variety of industrial applications across Canada. Our
sales and applications engineers are ready to put our experience to work
on your next application, whether it's basic equipment or
one of our fully pre-packaged turnkey systems.
See our "links" to our suppliers websites page for a direct connection to their sites, or our "how to contact us" page for more details!
| |||
| |||
| Applications | Product | Flows to: | Heads to: | Comments | |
| Water Supply, Wastewater and Plant Effluent Pumps | Aurora, Layne & Bowler / Verti-Line, Fairbanks Morse end suction, split case, vertical turbine & well gas pumps | 220,000 GPM (50,000 m3/hr) | 7,000 ft (2,134 m) | Cooling water, water supply, effluent service, sump and transfer. | |
| Hydromatic submersible non-clog, grinder and self-priming wastewater pumps | 15,000 GPM (3,400m3/hr) | 260 ft (79 m) | Sewage, plant effluent, wastewater and river intake. |
 |
| Applications | Product | Flows to: | Heads to: | Comments | |
| Boiler Feed and Condensate Pumps and Systems | Aurora regenerative turbine pumps | 150 GPM (34 m3/hr) | 700 ft (214 m) | Large Canadian inventory for immediate delivery. | |
| Grundfos multi-stage centrifugal pumps | 180 GPM (41 m3/hr) | 675 ft (206 m) | All stainless steel construction is standard. | ||
| Sundyne/Sunflo single stage, high speed pumps | 1,0000 GPM (227 3/hr) | 5,500 ft (1,676 m) | Low flow/high pressure and low NPSH requirements. | ||
| Packaged condensate/boiler feed systems with tanks, controls and accessories | as required | as required | Several configurations available, receiver sizes to suit system requirements. |
| |
| Applications | Product | Flows to: | Heads to: | Comments | |
| Chemical Handling Pumps - Mechanically Sealed | Sundyne / Sunflo centrifugal API process pumps | 1,000 GPM (227 m3/hr) | 15,000 ft (4,570 m) | Specialists in low flow, high head, low NPSH, suction pressure to 2,200 psi. | |
| Dean horizontal ANSI B73.1 and vertical in-line pumps | 6,500 GPM (1,476 m3/hr) | 800 ft (244 m) | Large Canadian inventory for immediate shipment. | ||
| Dean heat transfer pump - high temperature designs | 3,100 GPM (704 m3/hr) |
800 ft | To 8500F (4540C) ,6000F (3150C) with no cooling. | ||
| Wernert chemical pump, armoured plastic designs | 13,200 GPM (3,000 m3/hr) | 800 ft (244 m) | A safe, economical alternative to exotic metals. |
| |
| Applications | Product | Flows to: | Heads to: | Comments | |
| Chemical Handling Pumps - Sealless | Kontro, ANSIMAG mag drive centrifugal | 5,000 GPM (1,136 m3/hr) | 700 ft (213 m) | Offered in all alloys and non-metallic materials. API, ANSI, self-priming and high-pressure designs. | |
| Blackmer mag drive rotary vane | 335 GPM (76 m3/hr) | 150 psi (1,033 kPa) | Dry run capability - ideal for self-priming / line stripping and stocked in Canada. |
| |
| Applications | Product | Flows to: | Heads to: | Comments | |
| Fire Water Pumps | Aurora, Layne & Bowler/Verti-Line horizontal and vertical turbine fire pumps and packaged systems | 7,500 GPM (1,703 m3/hr) | 580 ft (175 m) | UL / ULC / FM approved horizontal and vertical, electric and diesel drive c/w all accessories, piping, instrumentation and controls. |
| |
| Applications | Product | Flows to: | Heads to: | Comments | |
| High Pressure Pumps | FMC plunger and piston pumps | 585 GPM (133 m3/hr) | 10,000 psi (68,910 kPa) | Ideal for centralized pressure cleaning systems. | |
| Sunflo high speed centrifugal pumps | 600 GPM (36 m3/hr) | 5,500 ft (1,676 m) | Low NPSH, low flow, high heads and working pressures. | ||
| Milton Roy chemical injection pumps & systems |
2,650 GPH (10 m3/hr) |
15,000 psi (103,000 kPa) |
Sealless high pressure process pumps. |
| |
| Applications | Product | Flows to: | Heads to: | Comments | |
| Sump and Drainage Pumps | Aurora, Hydromatic, Dean suspended and submersible styles | 7,500 GPM (1,703 m3/hr) | 270 ft (82 m) | Available in all materials for clean water or chemical services. |
| |
| Applications | Product | Flows to: | Heads to: | Comments | |
| Chemical Injection and Metering Pumps | Milton Roy metering pumps and injection systems, process pumps | 2,650 GPH (10 m3/hr) | 15,000 psi (103,000 kPa) | Complete chemical injection and blending systems available with controls, piping, tanks, etc. |
| |
| Applications | Product | Flows to: | Heads to: | Comments | |
| Progressing Cavity Pumps | Tarby progressing cavity pumps | 1,025 GPM (233 m3/hr) | 1,500 psi (10,300 kPa) | All materials and configurations. Replacement parts for other manufacturers. |
| |
| Applications | Product | Flows to: | Heads to: | Comments | |
| Rotary Pumps | Blackmer positive displacement rotary vane and hose pumps | 2,300 GPM (525 m3/hr) | 200 psi (1,400 kPa) | Excellent for low or high viscosity, self-priming. | |
| Leistritz rotary screw pumps | 4,400 GPM (1,000 m3/hr) | 2,275 psi (15,700 kPa) | For crude oil, fuel oil and viscous liquids. |
| |
| Applications | Product | Flows to: | Heads to: | Comments | |
| Air Operated Diaphragm Pumps | Yamada*air
operated double diaphragm pumps * Ontario and Quebec only | 200 GPM (45 m3/hr) | 100 psi (689 kPa) | Unique air valve prevents stalling / icing. Wide range of metals and non-metallic materials. |
| |
| Applications | Product | Flows to: | Heads to: | Comments | |
| Air Compressors | Quincy* reciprocating and rotary screw compressors * only in BC, AB, SK, MB | 1,500 CFM (43 m3/min) | 500 psi (3,450 kPa) | Lubricated and oil-free designs, dryers and filtration. |
| |
| Applications | Product | Flows to: | Heads to: | Comments | |
| Rotary Blowers | Aerzen* rotary positive displacement air blowers * only in BC, AB, SK, MB | 47,300 CFM (1,340 m3/min) | 365 psi (2,500 kPa) | For conveying and aeration. |
| |
| Applications | Product | Flows to: | Heads to: | Comments | |
| Specialty Solids-Handling Pumps | Vaughan*
chopper pumps * Ontario, Quebec and Atlantic Canada only | 10,800 GPM (2,450 m3/hr) | 225 ft (68 m) | Chops and pumps with no plugging, vertical and submersible, self priming | |
| Abel membrane and piston pumps | 2,650 GPM (600 m3/hr) | 3,625 psi (25,000 kPa) | Ideal for viscous and solids-laden, sludges |
| |
| Applications | Product | Flows to: | Heads to: | Comments | |
| Vacuum Pumps | Aerzen* rotary lobe and Quincy* reciprocating and rotary screw vacuum pumps *only in BC, AB, SK, MB | 48,000 CFM (1,400 m3/min) | 29" Hg (737 mm) | High vacuum with no water requirements. |
| |
| Applications | Product | Flows to: | Heads to: | Comments | |
| Process Gas Compressors | Sundyne Compressors centrifugal gas compressors | 10,000 CFM (282 m3/min) | To 6.0 ratio | High suction and working pressure capability, ideal for toxic or corrosive gases. | |
| Aerzen*
rotary screw oil-free compressors * only in BC, AB, SK, MB | 48,000 CFM (1,400 m3/min) | 580 psi (3,996 kPa) | Turnkey packages, patented pulsation cancellation design. | ||
| Burton Corblin diaphragm and piston compressors | 3,000 CFM (83 nm3/hr) | 15,000 psi (103,365 kPa) | Specialty gas handling with oil-free designs, where leakage or contamination is unacceptable. |
| |
| Applications | Product | |
| Packaged Systems | National Process Equipment custom pump and compressor packages including piping, instrumentation and controls to suit any application. |
| |
| Applications | Product | |
| Service and Repair | National Process Equipment services include system engineering analysis, field and shop repair or modifications to any make of existing pump or compressor equipment. Service contracts are also available. |
| |
 |
| About Us What's New Our Products & Markets Our Services How to Contact us Links to our Suppliers Websites Site Map Home Page |
